Tamping function Roller Compaction Equipment
Compaction method used by this tool is kneading or crushing action. With this method the surface soil compaction is expected to be passed without much hindrance. When the material has been solid, leg did not go further into the ground. If the density of the soil surface is not in accordance with what is to be achieved, it can be concluded that the tools used are too heavy or tools are not suitable for the type of material there. Good tamping roller is used for this type of sandy loam soil with effective compaction depth of about 15 to 25 cm. In operation, each compaction done overlap approximately 30 cm.
Terms of soil compaction with this tool by:
- Number of passes: each type of coating requires a certain number of passes.
- The thickness of the layer: it will not exceed the depth of penetration of feet.
- Density layer: to be fulfilled and tested in the laboratory.
Tamping tool can be modified to be:
- Mesh Grid Roller (roller Type Woven) This .Penggilas foot wheels in the form of woven, which will produce the effect of compacting of the bottom. Very good for compacting soil layer ygkasar. Weight gain can reach 10 tons.
- Segment Roller (roller Plate Type) The machine is legged wheel roller plates (segments or pads) tiered stacking. This gear legs will give the effect of compacting under foot wheels although not in too deep. The tool is able to squeeze out the excess water contained in the soil layers so that compaction can be performed well.
0 Response to "Tamping Roller Compaction Equipment function."
Post a Comment